|
Wrapped Wire Connector Grip
This grip is designed to facilitate the testing of wrapped wire connections and terminations. The grip is formed in an "L' shape that can be notched by the user to any desired dimension to accommodate a connection post. During a test, the fixture is slipped over the terminal post below the wire wrap. When a tension load is applied, the grip engages the wrap and pulls it off the post.
Capacity
130 N, 29.2 lbf
Packaging
Includes upper and lower grips
Applications
Ideal for testing wrapped wire connections and terminations.
... more information
|
|
Cam Operated Smooth Faced Grip
This is a 6 mm (0.23 in) wide aluminium grip. The specimen is inserted between the holding blocks and secured by the cam by its hand lever. The cam and tensing block may be removed for cleaning.
Capacity
130 N, 29.2 lbf
Packaging
Single grip only.
Applications
Ideal for testing the tensile strength of wire or filaments, magnetic tape, film, foils and adhesives.
... more information
|
|
Terminal Testing Turret
This turret assembly is used to test the strength of wire terminals, connectors and other end fittings. The standard rotating turret has nine grooves to accept 14 to 4 gauge wire (blank turrets are available for custom sizes). A ring stud is provided behind the wheel for use with ring-type terminals.
Capacity
2.5 kN, 562 lbf
Packaging
Single grip only.
Applications
Ideal for testing the strength of wire terminals, connectors and other end fittings.
... more information
|
|
Spool Grip
This grip is ideal for testing difficult to handle samples such as fine wire and fibres. The sample is simply threaded into the locking groove and wrapped around the spool. A tension wire holds the sample securely on the spool.
Capacity
130 N, 29.2 lbf
Packaging
Single grip only.
Applications
Ideal for testing the strength of fine wire, fibres, thread, filaments etc.
... more information
|
|
Miniature Filament Fixture
This grip features a 11 mm (0.43 in) diameter snubber in a precision machined swivelling fixture that ensures specimen alignment with the force when load is applied. Maximum specimen diameter is 0.8 mm (0.31 in).
Capacity
250 N, 56.25 lbf
Packaging
Includes upper and lower grip. Top and bottom grips may be ordered separately.
Applications
Ideal for testing the strength of extremely fine, flexible wire and filaments etc.
... more information
|
|
Wire Terminal Testing Fixture
This fixture has been specifically designed to test the ultimate strength of wire/terminal connections. The upper grip consists of a self-aligning wheel, which features nine equally spaced slots to hold standard terminal shank sizes. Ring terminals are secured with a pin in line with the largest slot. The bottom grip has an eccentrically mounted self-tightening knurled roller, which will accept wire up to 3.2 mm (0.13 in) in diameter.
Grip slot sizes:
0.8 mm (0.03 in)
1.2 mm (0.05 in)
1.6 mm (0.06 in)
2.0 mm (0.08 in)
2.4 mm (0.09 in)
3.2 mm (0.13 in)
4.0 mm (0.16 in)
4.8 mm (0.19 in)
6.4 mm (0.25 in)
Capacity
500 N, 112.5 lbf
Packaging
Includes upper and lower grip. Top and bottom grips may be ordered separately.
Applications
Used for testing the break resistance of standard and ring terminals shanks and wire.
... more information
|
|
Grooved Snubber 1/16 in Wire Grips
The grooved snubber and post design of this grip ensures centre break of flexible wire up to 1.6 mm (0.06 in) in diameter.
This grip may also be used for testing cord, rubber or filaments. A 25 mm (0.98 in) diameter snubber is mounted on the swivelling plate so that the specimen will align with the force when load is applied. A ball socket mounting screw in the upper grip maintains accurate alignment of the upper and lower grips. Maximum specimen diameter is 2 mm (1/16 in).
Capacity
1 kN, 225 lbf
Packaging
Includes upper and lower grip.
Applications
Used for testing fine flexible wire, filaments, cord, rubber etc.
... more information
|
|
Vice Action Grips
This vice action grip features replaceable aluminum facing disks, plus other optional faces made of either leather or rubber for delicate specimens. Maximum sample diameter 1.6 mm (0.06 in).
Capacity
2 kN, 450 lbf
Packaging
Includes upper and lower grip.
Applications
Ideal for tensile testing of soft wire, cord and fibre.
Applicable Standards
This grip corresponds to the mechanical testing of steel wire according to BS 4545: 1970.
... more information
|
|
Bollard Grip
The sample is wrapped around the bollard and the free end is clampled firmly into place. Grip stresses in the specimen are distributed in the material in contact with the bollard circumference. Maximum sample diameter 5 mm (0.2 in).
Capacity
2 kN, 450 lbf
Packaging
Includes upper and lower grip.
Applications
Ideal for testing wire, yarns, and threads.
Applicable Standards
This grip corresponds to the mechanical testing of steel wire according to BS 4545: 1970.
... more information
|
|
Lightweight Spring-Loaded Clamp Grip
This lightweight, spring-loaded grip has rubber faces and is ideal for very light force measurements. Maximum sample width is 5 mm (0.19 in). Maximum sample thickness 1 mm (0.04 in). Maximum sample diameter 1 mm (0.04 in)
Capacity
5 N, 1.12 lbf
Packaging
Includes upper and lower grips.
Applications
Used for tensile testing of fine wire, thread and fibres.
... more information
|
|
Self-Tightening Wire and Cord Grip
This is a self-tightening grip for testing wire, cord and similar products. The test sample is wrapped around the smaller removeable, semi-circular block and then looped over the large one.
Capacity
2.5 kN, 562 lbf
Packaging
Single grip only.
Applications
Used for tensile tests on insulated wire, cord, stranded cable and similar products.
... more information
|
|
Cord and Twine Grip
This grip is designed for reliable centre breaks, quick installation and easy release of the specimen. The grip utilises three non-locking pins for wrapping the specimen in a "figure 8" pattern. Throat clearance with pins installed and clearance between the pins is 9.5 mm (0.37 in). Throat the upper grip helps maintain upper and lower grip alignment.
Capacity
2.5 kN, 562 lbf
Packaging
Includes upper and lower grip. Top and bottom grip may be ordered separately.
Applications
Ideal for testing cord and twine.
... more information
|
.jpg)
|
Double Bollard Grip (30 kN)
This grip is designed for testing wire, yarns and thread. The test specimen is secured in a clamp and wound round the two bollards. Grip stresses in the specimen are distributed uniformly around the bollard circumference. Maximum sample diameter 6 mm (0.24 in). Eye end diameter 31.7 mm (1.25 in).
Capacity
30kN, 6744 lbf
Packaging
Includes upper and lower grip.
Applications
Ideal for testing wire, yarn and thread.
... more information
|
|
Double Bollard Grip (30 kN)
This double bollard grip is ideal for tensile testing of seat belts, safety harnesses and similar products. Maximum sample width is 60 mm (2.36 in). Maximum sample thickness 5 mm (0.2 in).
Capacity
30 kN, 6744 lbf
Packaging
Includes upper and lower grip.
Applications
Ideal for seat belts, safety harnesses and similar products.
... more information
|
